Home / Artikel
The Icom IC-2300H is a VHF single-band mobile radio rig designed to deliver powerful communication, clear audio, and reliable operation while driving or running field activities. With transmit power of up to 65 watts, approximately 4.5 watts of audio, and a compact, rugged design, this radio rig is a solid choice for users who need consistent 2-meter VHF communication.
As a development of the Icom IC-2200H — long familiar to radio communication users — the IC-2300H retains a familiar, easy-to-use panel layout. However, this model features a more compact footprint, making it more flexible to install in a variety of vehicles, including those with limited cabin space.
65W Performance for Wider Communication
One of the key advantages of the Icom IC-2300H is its selectable output power of up to 65 watts. The high transmit power helps produce a stronger signal, especially for long-distance communication, mobile-to-mobile, convoy communication, and connections through repeaters on the 2-meter VHF band.
The Icom IC-2300H provides four transmit power levels: 65W, 25W, 10W, and 5W. Users can adjust the power to suit their operational needs. When maximum range is required, the 65W setting can be used to help strengthen communication. Meanwhile, lower power can be selected when communicating over short distances or when wanting to save vehicle power consumption.
With a transmit frequency range of 144–148 MHz and a receive range of 136–174 MHz, the IC-2300H supports a wide range of VHF communication needs. This radio is suitable for radio communities, operational teams, support vehicles, outdoor activities, intercity travel, and internal communication needs within certain work areas, in accordance with applicable frequency regulations.
Loud, Clear Audio in Noisy Environments
Communication inside a vehicle is often disrupted by engine noise, wind, traffic, and surrounding environmental noise. Therefore, audio quality is one of the important factors when choosing a mobile radio rig.
The Icom IC-2300H offers audio output of approximately 4.5 watts at a 4-ohm load. The loud, clear audio helps users still hear important information, operational instructions, or calls from fellow communicators even while in a noisy vehicle cabin.
This audio output makes the IC-2300H ideal for a variety of situations, such as:
Communication during touring or vehicle convoy trips
Coordination of operational vehicles in the field
Communication support for community activities
Use on logistics and transportation vehicles
Communication during outdoor or expedition activities
Monitoring communication through VHF repeaters
With support for squelch and S-meter squelch settings, users can also help reduce noise when no signal is being received. As a result, communication feels more comfortable and incoming information is easier to understand.
Compact Design with a Rugged Aluminum Chassis
The Icom IC-2300H is designed as a mobile radio that is easy to install in a vehicle. Its dimensions are approximately 140 × 40 × 162 mm, with a weight of around 1.1 kg. This size makes it compact enough to be placed on the dashboard, center console, under the seat, or other areas suited to the vehicle's installation needs.
Despite being compact, this radio rig uses a rugged die-cast aluminum chassis. This material not only provides better physical protection but also supports effective heat dissipation. The ability to dissipate heat is important when the radio is used for extended transmissions or at high power.
The sturdy body design makes the Icom IC-2300H more ready for demanding operational conditions. Whether for long trips, daily use in a vehicle, or field communication activities, this radio is built to deliver stable performance.
Its front panel also retains an easily recognizable layout, especially for users of the Icom IC-2200H. Long-time users can adapt quickly, while new users can learn the operation more easily thanks to clearly organized buttons and display.
**Wide, Easy-to-Read LCD Screen
The Icom IC-2300H is equipped with a wide LCD screen that makes it easy for users to read the frequency, channel number, power status, signal indicator, and other operational information. A clear display is very helpful when the radio is used while driving or under changing lighting conditions.
This radio also offers a choice of yellow, orange, and green backlight colors. Users can adjust the display to their personal preference or the the lighting conditions inside the vehicle. The right backlight color can help improve screen visibility both during the day and at night.
In addition, there is a real-time power supply voltage display feature. This feature makes it easy for users to to monitor the condition of the 13.8 V DC power supply from the vehicle. Voltage monitoring can help ensure the radio operates under suitable and stable power supply conditions.
Channel Capacity for More Flexible Operation
To support a wide range of communication needs, the Icom IC-2300H provides up to 207 channels. This capacity includes memory channels, scan edge channels,, and the call channel. With such a large number of channels, users can store important frequencies without having to enter frequencies manually over and over.
This feature is very useful for users who communicate on multiple frequencies, use different repeaters, or have specific channel needs for particular groups. Well-organized channel settings can also speed up the communication process when needed.
The IC--2300H supports wide and narrow channel settings, allowing users to adjust the channel configuration to the communication system in use. This feature provides additional flexibility for more targeted VHF operation.
Operational Features That Support Reliability
The Icom IC-2300H does not rely solely on high power and strong audio. This radio rig is also equipped with various practical features that support safety, comfort, and efficiency in everyday use.
The auto DTMF function allows users to make automatic calls using DTMF tones. This feature is useful for certain operational needs, including access to repeater systems or sending pre-programmed call codes.
There is also a time-out timer that helps prevent transmissions from lasting too long. This feature is important for avoiding excessive channel use, preventing the radio from transmitting unintentionally for long periods, and helping maintain communication discipline.
The automatic repeater lockout feature helps prevent inappropriate transmission under certain conditions. Meanwhile, auto power-off can be used to help save power when the radio is not used for a set period of time.
To improve signal reception comfort, the Icom IC-2300H also comes with several of the following features:
S-meter squelch to open the squelch based on the strength of the received signal
Squelch attenuator to help reduce interference from overly strong signals
Squelch delay to provide a delay in closing the squelch so communication is not cut off too quickly
Wide and narrow channel settings to adjust to communication needs
Call channel for quick access to important frequencies
Scan function to help monitor active channels
The combination of these features makes the IC-2300H more than just a high-power VHF radio rig — it is a mobile communication device designed for practical, sustainable use.
Cloning for Setting Up Multiple Units
For companies, communities, and teams that use more than one radio unit, manually configuring each device can be time-consuming. The Icom IC-2300H provides a cloning feature that allows configuration duplication between radios or via a PC.
Through this feature, channel data, frequency settings, operational parameters, and other configurations can be copied to compatible units. This helps maintain uniform radio settings across a vehicle fleet or group of users.
The cloning feature is very useful for needs such as:
Installing radios in several operational vehicles
Standardizing channels across a community or organization
Setting up radio units for field teams
Saving time when configuring new devices
Reducing the risk of manual errors in entering frequencies and parameters
With a more efficient setup process, the radio can be ready to use more quickly to support communication activities.
Icom IC-2300H Specifications
The Icom IC-2300H operates on a transmit frequency of 144–148 MHz and a receive frequency of 136–174 MHz. This radio is a VHF single-band mobile device designed for operation on the 2-meter band.
The available output power consists of four options: 65W, 25W, 10W, and 5W. This flexibility helps users adjust transmit strength to their communication distance needs and operating conditions.
This radio has a capacity of up to 207 channels, including memory channels, scan edges, and the call channel. For power needs, the IC-2300H uses a 13.8 V DC power supply with a ±15% tolerance.
Current consumption during transmission at maximum power is approximately 11A. In standby, current consumption is approximately 0.4A, while receiving at maximum audio is approximately 1.5A. Therefore, proper installation with suitable power cables, fuses, and vehicle electrical systems is very important to maintain radio performance.
The dimensions of the Icom IC-2300H are approximately 140 × 40 × 162 mm, with a weight of about 1.1 kg. Its antenna impedance is 50 ohms and it uses an SO-239 connector. Frequency stability is within ±3 ppm over a temperature range of –10°C to +60°C. Meanwhile, audio output reaches approximately 4.5W at a 4-ohm load.
The Right Choice for Mobile VHF Communication
The Icom IC-2300H is an attractive VHF mobile radio rig option for users who need a combination of high transmit power, clear audio, compact design, and a full set of operational features. With output of up to 65W, this radio helps deliver stronger communication for travel, convoys, vehicle operations, and field activities.
The die-cast aluminum chassis supports device durability while helping dissipate heat during transmission. The wide LCD screen with selectable backlight colors makes monitoring radio information easy, while the 207-channel capacity and cloning feature make operational setup more flexible.
Unlimited communication with maximum 65W performance in a compact design. The Icom IC-2300H is ready to be your strong, clear, and reliable communication partner on every journey.
To order the Icom IC-2300H, contact WhatsApp at 081586838888. You can also visit the official website Alnindo or Alnindo Indonesia for information and special pricing.
Our address: Perkantoran, Jl. Taman Palem Mutiara No. 1 Blok A18, RT.7/RW.14, Cengkareng Timur, Kecamatan Cengkareng, Kota Jakarta Barat, Daerah Khusus Ibukota Jakarta 11730.
Icom IC-2300H FAQ
What is the Icom IC-2300H?
The Icom IC-2300H is a VHF single-band mobile radio rig for the 2-meter band. It is designed for vehicle use and offers output power of up to 65W, audio of approximately 4.5W, and a capacity of up to 207 channels.
What is the maximum output power of the Icom IC-2300H?
The Icom IC-2300H has a maximum output power of up to 65W. In addition,, 25W, 10W,, and 5W power options are available so users can adjust to their communication needs and power consumption.
Is the Icom IC-2300H suitable for installation in a car?
Yes. The Icom IC-2300H is designed as a mobile radio rig for vehicles. Its compact dimensions, approximately 140 × 40 × 162 mm, make it easy to install in cars, operational vehicles, logistics vehicles, and vehicles supporting field activities.
Is the audio of the Icom IC-2300H clear enough inside a vehicle?
Yes. This radio has audio output of approximately 4.5W at a 4-ohm load. The loud, clear audio helps communication remain audible in noisy vehicle conditions, such as when the engine is running or the vehicle is in motion.
How many channels are available on the IC--2300H?
The Icom IC-2300H provides up to 207 channels. This number includes memory channels, scan edges, and the call channel to make access to frequently used frequencies easy.
Can the IC-2300H be used with a repeater?
The IC--2300H supports VHF communication needs that can include use through repeaters in accordance with applicable frequency settings and regulations. This radio also has an automatic repeater lockout feature to support safer operation.
Does the Icom IC--2300H have a cloning feature?
Yes. The Icom IC-2300H has a cloning feature between devices or via PC. This feature makes it easy to copy channel configurations and radio settings to several units at once.
What power supply voltage does the Icom IC-2300H require?
This radio uses a 13.8 V DC power supply with a ±15% tolerance. When transmitting at full power, current consumption is approximately 11A, so the vehicle's electrical installation needs to be done properly and in accordance with the device's recommendations.
What antenna is used for the Icom IC-2300H?
The Icom IC-2300H uses an antenna with a 50-ohm impedance and an SO-239 connector. Choosing a suitable 2-meter VHF antenna and installing it correctly will help maximize radio communication performance.
How do I buy the Icom IC-2300H?
To order, contact WhatsApp at 081586838888 or visit https://alnindo.com/ and https://www.alnindo.id/ for product information and special pricing.
